Freightliner M2-112 chassis, 410HP, 54,000 lb. GVWR, tandem axle, designed for C-17 loading, aircraft tie-downs, Modular Re-Mountable Aluminum Body, 41' OA length, 2 slide outs, 4 workstations, 4 equipment racks, multi-purpose printer, conference table to seat 6, bench seating, 2-42" wall mounted plasma, 1 Smartboard, 2- rear mounted HVAC units, gun rack, recessed floor tie-downs, 2-20KW generator, recessed roof to accommodate 1.2M SAT, front winch, 30' mast system, DSS, emergency light package, trailer hitch, back up camera, stabilizer jacks, awning, custom paint and graphics, other information classified.
Freightliner M-2 106 chassis, 31' O/A length, single axle, MBF Modular Re-Mountable body, (1) manual awning, I/O panel, stabilizer jacks, roof access ladder, conference seating to sit (5), (3) workstations, (4) equipment racks, (3) 15,000 BTU A/C w/ heat, exterior rack access compartment, cable pass thru, fold out steps w/ handrail, converter shore power compartment, tommygate lift gate, battery compartment, trailer hitch, back up camera, white boards, kick space heater, 55" LCD monitor, floor tie down rings, printer, load center panel, service alley for equipment racks.
Freightliner FL70 chassis, MBF Modular Re-Mountable body, 33,000 GVWR, 36' 6" O/A length, (3) slide outs, single axle, generator, awning, I/O panel, stabilizer jacks, exterior scene lighting, emergency light package, exterior graphics, roof access ladder, conference seating for (6), (7) workstation, galley, DSS, CSE satellite, 30' mast, exterior battery compartment, tank access and storage, (4) 15,000 BTU AC w/ heat, exterior refrigerator vent, exterior 32" LCD display, exterior rack access, siren speaker, back up camera, fresh water fill, trailer hitch, overhead cabinets in slide outs w/ bench seats and workstations, dry erase boards, 32" and 22" LCD monitors, 42" LCS w/ smartboard display.
Yukon, long wheel base, 4x4, (1) rear workstation with (1) equipment rack, roof platform with roof access ladder, driver's console, emergency light package. Optional: (2) rear workstations with (2) racks.
Freightliner M2-106 Crew Cab chassis, 26,000 lb. GVWR, 260HP diesel, 33’ 6” OA length, “Modular Re-Mountable” aluminum body, (1) interior workstation and (1) exterior workstation, (1) 32” wall mounted LCD monitor, galley, custom heavy duty adjustable aluminum shelving, wall and floor equipment tie-downs, rear roll up door with lift gate, (2) A/C, exterior awning, (2) cable reels, 12 KW generator, stabilizer jacks, (1) equipment rack, Optical Table, off air antenna, exterior scene lighting and roof access ladder.
Command Vehicle: GMC 4x4 Chassis Long Body w/ 300HP diesel engine, 1.2M SAT w/ 8 watt BUC for 1 Meg up-down and I-Direct modem, 20kw floor compartment generator w/ storage, fold down steps w/ handrail, exterior monitor, UPS, night services, 26" hydrolic jacks, 80 amp converter, TracStar 1.2 w/ extreme SAT. Support Vehicle: GMC 4x4 Chassis Extended Cab w/ 300HP diesel engine, extended mast section, 12kw floor compartment generator w/ storage, 42' mast.
GMC 550, Designed for loading on C-130 aircraft, tie downs, Modular Re-Mountable Aluminum Body, 2 workstations, 2 equipment racks, roof access ladder, emergency light package, 1.2m SAT, 2-50' mast, 12KW generator, front winch, trailer hitch and custom paint and graphics.
Ford F350 Crew Cab, Modular Re-Mountable Aluminum Body, Designed for loading a C-130 aircraft, tie-downs, 50' mast, 1.2m SAT, emergency light package, stabilizer jacks, 12,000 lb. winch, roof access ladder, I/O, HVAC and generator, custom paint and graphics.
Command Vehicle: Freightliner M2-106 Business Class Extended Cab Chassis, 4 wheel drive, 300 hp diesel engine, Pass Thru Cab, 206” wheel base, integrated stabilizing system, 12 KW 240 VAC 60 Hz diesel powered generator, (4) System Racks, TracStar 1200 System, roll-a-way awning, 42' mast, weather station.
Freightliner M2-112 chassis, 410 HP, 40’ OA length, C-17 loadable, (2) slide outs, front mounted winch, (2) BARD rear mounted HVAC units, (1) 30’ mast system, 1.6M SAT antenna recessed on roof to accommodate aircraft loading, aircraft tie-downs, DSS, emergency light package, (2) 20KW generators, stabilizer jacks, Roof access steps Forward Area: (4) workstations, with (4) equipment racks, galley, printer, floor equipment tie-downs, fresh water sink and water tank system, Rear Conference Area: Conference table to seat (6), Slide out with bench seating, (2) 42” plasma.